Home Page
Company Profile
Our Products
Oil Cleaning Machinery
Varnishing Machine
Vacuum Equipment & System
Special Purpose Machines
Contact Us
AR ENGINEERING
Home
»
Products
»
Vacuum Equipment & System
» Vacuum/Pressure Imprgnating Plants
Vacuum/Pressure Imprgnating Plants
<< Previous
Product Code :
12
Product Specification
TECHNICAL SPECIFICATIONS
Vacuum / Pressure Impregnation Plant is designed for varnish impregnation to be carried out in following steps and will be generally as per the schematic diagram attached.
Pre-heating the jobs in either Impregnation Chamber or in Oven if you have a less time available.
Evacuation of Impregnation Chamber (after putting the jobs) to make the voids in the jobs clear and drying of jobs for specific time & required temperature / vacuum.
Induction of impregnant (Varnish) in the Impregnation Chamber from impregnant Tank to submerge the jobs in it.
Pressurize the Impregnation Chamber with dry air or nitrogen to fill the voids with Impregnant.
Return the varnish to Impregnant Tank.
Cure the jobs either in Impregnation Chamber or in Oven for specific time if time available is less.
The plant will be generally as per the schematic diagram attached herewith and will mainly consist of following major components:
IMPREGNATION CHEMBER:
Chamber Dimensions: Diameter – Ø --- mm, Height ---- mm (suitable for jobs)
Material of construction: MS plates, bars, structural etc.
Working Pressure: 1- 4 kg / cm2 & Vacuum: 0.1 / 1 / 10 / 50 torr
Lid Opening: Screw Davit type for quick opening & closing or hydraulic operated automatic
Temperature control: With Thermostat or digital TIC
Will be provided with: Oil Heating / cooling Jacket, Quick Clamping bolts, Stirrer, Neoprene Gaskets, Sight glass, Illuminating Lamp, Pressure Safety Valve, Vacuum & Pressure gauges etc. as per the varnish specifications.
IMPREGNANT STORAGE TANK :
Material of Construction: M.S. plates, bars, structurals etc
Varnish Tank Capacity: 50 - 80% of Impregnation chamber.
Will be provided with: Level Indicator, Motorised Stirrer, TIC to indicate and control the varnish temperature, Return Line Filter to prevent entry of impurities carried away from impregnation chamber to storage tank and suitable drain. Silica Gel Breather will also be provided to prevent absorption of atmospheric moisture.
VACUUM SYSTEM :
Type: Rotary Oil sealed Vacuum Pump or Roots – Rotary combination.
Capacity (free air displacement): 50 LPM to 1600 Mᵌ/hr.
Ultimate Vacuum with G. B. Closed - 0.005 torr to 0.0001 torr.
Make: Indowoosung, Everest, Doftel or reputed Make
Working Vacuum – 0.1 / 1 / 10 / 50 torr
Condenser: Water-cooled. (Water cooling system optional)
COMPRESSOR :
Type: Piston Type
Free air displacement: 10 CFM
Working Pressure: 4 Kgf/cm2
Make: Reputed make
In case of low vacuum/pressure impregnation, combined vacuum/pressure pump can be used
IMPREGNANT TRANSFER SYSTEM :
Interconnecting pipes: M.S. ERW, B Class or SS in case of resin impregnation.
Valves: Piston Type (Vacuum tight with O'rings & Nylon wipers) OR Ball valves with Teflon seals ( manual or tuated )
Connections: Flanged type with Neoprene O'rings.
Operating Platform: M.S. Fabricated suitable for easy plant operation in case of big plants.
CONTROL PANEL:
Centralized Control panel for easy and safe operation will be provided along with necessary gauges and controls
.
Other Products in 'Vacuum Equipment & System' category
Transformer Oil Regeneration Reclamation Plant
Vacuum Impregnation
Trickle Impregnating Machine Batch Type
Transformer Oil Dehydration Plant
<< Back
Contact Details
AR ENGINEERING
L-77, Additional MIDC,Satara - 415004, Maharashtra, India
Phone:
91-2162-240385/234301
Fax:
91-2162-240569
Send Mail
Send SMS
Key Personnel
Mr. Arvind Mutalik (Proprietor)
Mobile:
+919822393556
Copyright © 2011-12 by AR ENGINEERING All Rights Reserved.
